LF510-S/SP27；LF 510-S/SP27

‌LF510-S/SP27 Product Description: A High-Precision, 500 A Current Sensing Solution Based on LEM’s Closed-Loop Hall Technology

‌

LF510-S/SP27 ‌Product Overview‌
The LF510-S/SP27 is a closed-loop Hall effect current sensor from LEM’s LF series, engineered for medium-to-high power industrial applications. Leveraging flux compensation technology, it achieves zero-flux closed-loop measurement of primary current, eliminating the power loss and thermal drift inherent in shunt resistors. Its through-hole primary conductor enables non-intrusive, high-efficiency current acquisition without disrupting the main circuit. The sensor delivers a highly linear, low-noise analog current output, making it an essential sensing element for power electronics systems demanding exceptional dynamic response and long-term stability.

LF510-S/SP27 ‌Key Features‌

‌Closed-loop flux compensation architecture‌: Dynamic feedback maintains zero magnetic flux in the core, significantly enhancing linearity (±0.6%) and immunity to external electromagnetic interference

‌High-precision operation across wide temperature range‌: Stable performance from -40°C to +85°C with minimal zero and gain drift, ideal for harsh industrial environments

‌Extended linear measurement range‌: Accurately captures transient overcurrents and load spikes up to ±800 A

‌Microsecond-level response time‌: Under 1 µs response enables real-time protection, rapid closed-loop control, and high-frequency pulse current monitoring

‌Zero insertion loss‌: Low-resistance primary conductor introduces no voltage drop, preserving system efficiency and thermal performance

‌Industrial-grade electrical isolation‌: ≥5 kV RMS isolation voltage ensures compliance with IEC 61010-1 safety standards and protects operators and control systems

‌Dual-supply compatibility‌: Operates on standard industrial ±15 V or ±24 V DC power rails

‌Fully potted, UL 94-V0 encapsulation‌: Resistant to dust, moisture, and corrosive agents, ensuring reliable operation in demanding field conditions

‌Molex Mini-Fit Jr. connector interface‌: Standardized secondary-side connection enhances wiring reliability and simplifies maintenance

LF510-S/SP27 ‌Technical Specifications (Based on LEM Official Datasheet)‌

‌Rated current‌: 500 A RMS

‌Measurement range‌: ±800 A (linear)

‌Secondary output signal‌: Analog current output, typical 125 mA

‌Supply voltage‌: Dual DC ±15 V or ±24 V (nominal)

‌Accuracy‌: ±0.6% @ 25°C

‌Bandwidth‌: DC to 100 kHz

‌Response time‌: < 1 µs

‌Isolation voltage‌: ≥5 kV RMS (50 Hz, 1 minute)

‌Operating temperature‌: -40°C to +85°C

‌Mounting‌: Panel mount, primary aperture 30 mm

‌Connector type‌: Molex Mini-Fit Jr.

‌Certifications‌: RoHS compliant, UL 94-V0 flame rating, conforms to IEC 61800-5-1 and EN 50155 (railway applications)

LF510-S/SP27 ‌Applications‌
This sensor is widely deployed in industrial systems requiring precise, fast, and reliable current monitoring:

‌Medium-power renewable energy inverters‌: Enables high-accuracy DC-side current acquisition in 200–500 kW photovoltaic and energy storage systems, supporting MPPT tracking and islanding detection

‌Railway traction control systems‌: Provides closed-loop current feedback for auxiliary converters, battery chargers, and braking choppers in locomotives and EMUs

‌Industrial variable frequency drives‌: Delivers isolated current feedback for 300–500 kW AC motor drives, enhancing torque dynamics and control precision

‌Uninterruptible power supplies (UPS) and DC bus monitoring‌: Facilitates rapid fault detection to ensure continuous power delivery to critical loads

‌Welding and electrolysis equipment‌: Maintains stable measurement under high-pulse, high-EMI conditions to improve process consistency and equipment longevity

‌Test and measurement systems‌: Serves as a high-accuracy current reference source for laboratory calibration and power electronics performance validation

‌Why Choose LF510-S/SP27 This Model?‌
Selecting the LF510-S/SP27 means choosing the engineering legacy of LEM’s over five decades in industrial sensing. Its closed-loop Hall architecture has been proven across millions of high-reliability systems worldwide, outperforming open-loop and shunt-based solutions in stability, accuracy, and longevity. The 500 A rated current design is precisely calibrated for medium-to-high power applications, offering optimal balance between performance and compact integration. Full potting and industrial-grade materials ensure uninterrupted operation in vibration-prone, humid, and dusty environments—significantly extending service life. As a preferred component in global high-end manufacturing, renewable energy, and rail transport, it integrates seamlessly with mainstream PLCs, DCS, and SCADA systems, reducing integration complexity and long-term maintenance costs. Rooted in LEM’s continuous innovation in power electronics sensing, it is a trusted foundation for building the next generation of intelligent energy and industrial automation systems.